DJI Ronin M 3-Axis Stabilizer

$510.00

SKU: RoninM Category:

Ronin M gimbal DJI

The little brother, but I have included the T shaped plate, so you can even balance a FS100 or FS7 on it!

The Ronin-M 3-Axis Handheld Gimbal Stabilizer is a camera stabilization system.

It supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver.
As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won’t have to hand-hold the rig during this process.
The included one 4S lithium-ion polymer battery powers the Ronin-M for up to six hours and a charger. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regime and avoid unnecessary added weight.

This item is available in Shanghai and Hong Kong